[Arm-netbook] Can't get 512M with MeleA1000

[Nicolas Aguirre]

2012/9/26 Alejandro Mery <amery at geeks.cl>:
> On 26 September 2012 19:15, Nicolas Aguirre <aguirre.nicolas at gmail.com> wrote:
>> 2012/9/26 Nicolas Aguirre <aguirre.nicolas at gmail.com>:
>>> 2012/9/26 cnxsoft <cnxsoft at cnx-software.com>:
>>>> On 9/21/2012 3:02 AM, Henrik Nordström wrote:
>>>>> tor 2012-09-20 klockan 17:27 +0200 skrev Floris Bos / Maxnet:
>>>>>> I wonder about that file name though.
>>>>>> Given that the code contains #ifdef CONFIG_SUN4I/CONFIG_SUN5I
>>>>>> constructs, wouldn't it be better to use a file name that reflects the
>>>>>> exact device it was build for?
>>>>> Should probablu use u-boot-spl.sunxi actually. sunxi is to mark file
>>>>> format, not destination target name. u-boot.bin is also arch dependent.
>>>>>
>>>>> Eventually we might get a sunxi arch supporting both, the differences is
>>>>> fairly small.
>>>>>
>>>>> Regards
>>>>> Henirk
>>>>
>>>> I've fixed the nightly build, and the scripts. I'm not in a position to
>>>> test it myself right now, so feedback is appreciated.
>>>> For SUN5I, I'll only be able to do it in November.
>>>>
>>>> _______________________________________________
>>>> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
>>>> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
>>>> Send large attachments to arm-netbook at files.phcomp.co.uk
>>>
>>> I tried it,
>>> with http://dl.linux-sunxi.org/nightly/2012.09.26/mele-a1000-vga_hwpack_2012.09.26.7z
>>>  but it doesn't work. Same image works great with 2012.09.18 version.
>>> :-(
>>>
>>> --
>>> Nicolas Aguirre
>>> Mail: aguirre.nicolas at gmail.com
>>> Web: http://enna.geexbox.org
>>> Blog: http://dev.enlightenment.fr/~captainigloo/
>>
>> And to be more precise, here what i get on the debug console :
>>
>> ELLO! BOOT0 is starting!
>> boot0 version : .2.2
>> dram size =512
>> Succeed in opening nand flash.
>> Succeed in reading Boot1 file head.
>> The size of Boot1 is 0x00036000.
>> The file stored in 0X00000000 of block 2 is perfect.
>> Check is correct.
>> Ready to disable icache.
>> Succeed in loading Boot1.
>> Jump to Boot1.
>> [       0.122] boot1 version : 1.2.6
>> [       0.122] pmu type = 3
>> [       0.150] axi:ahb:apb=3:2:2
>> [       0.150] set dcdc2=1400, clock=1008 successed
>> [       0.152] key
>> [       0.164] no key found
>> [       0.164] flash init start
>> [       0.179] flash init finish
>> [       0.180] fs init fail, jump to fel
>
> that's trying to boot from NAND, is that the intention?
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk

No, it's why there is a problem, it should boot from sdcard with the
hw pack installed on it, but it does not.
Ah and my nand is broken so it doesn't start on it.

-- 
Nicolas Aguirre
Mail: aguirre.nicolas at gmail.com
Web: http://enna.geexbox.org
Blog: http://dev.enlightenment.fr/~captainigloo/