[Arm-netbook] Can't get 512M with MeleA1000

[Alejandro Mery]

On 26 September 2012 19:15, Nicolas Aguirre <aguirre.nicolas at gmail.com> wrote:
> 2012/9/26 Nicolas Aguirre <aguirre.nicolas at gmail.com>:
>> 2012/9/26 cnxsoft <cnxsoft at cnx-software.com>:
>>> On 9/21/2012 3:02 AM, Henrik Nordström wrote:
>>>> tor 2012-09-20 klockan 17:27 +0200 skrev Floris Bos / Maxnet:
>>>>> I wonder about that file name though.
>>>>> Given that the code contains #ifdef CONFIG_SUN4I/CONFIG_SUN5I
>>>>> constructs, wouldn't it be better to use a file name that reflects the
>>>>> exact device it was build for?
>>>> Should probablu use u-boot-spl.sunxi actually. sunxi is to mark file
>>>> format, not destination target name. u-boot.bin is also arch dependent.
>>>>
>>>> Eventually we might get a sunxi arch supporting both, the differences is
>>>> fairly small.
>>>>
>>>> Regards
>>>> Henirk
>>>
>>> I've fixed the nightly build, and the scripts. I'm not in a position to
>>> test it myself right now, so feedback is appreciated.
>>> For SUN5I, I'll only be able to do it in November.
>>>
>>> _______________________________________________
>>> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
>>> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
>>> Send large attachments to arm-netbook at files.phcomp.co.uk
>>
>> I tried it,
>> with http://dl.linux-sunxi.org/nightly/2012.09.26/mele-a1000-vga_hwpack_2012.09.26.7z
>>  but it doesn't work. Same image works great with 2012.09.18 version.
>> :-(
>>
>> --
>> Nicolas Aguirre
>> Mail: aguirre.nicolas at gmail.com
>> Web: http://enna.geexbox.org
>> Blog: http://dev.enlightenment.fr/~captainigloo/
>
> And to be more precise, here what i get on the debug console :
>
> ELLO! BOOT0 is starting!
> boot0 version : .2.2
> dram size =512
> Succeed in opening nand flash.
> Succeed in reading Boot1 file head.
> The size of Boot1 is 0x00036000.
> The file stored in 0X00000000 of block 2 is perfect.
> Check is correct.
> Ready to disable icache.
> Succeed in loading Boot1.
> Jump to Boot1.
> [       0.122] boot1 version : 1.2.6
> [       0.122] pmu type = 3
> [       0.150] axi:ahb:apb=3:2:2
> [       0.150] set dcdc2=1400, clock=1008 successed
> [       0.152] key
> [       0.164] no key found
> [       0.164] flash init start
> [       0.179] flash init finish
> [       0.180] fs init fail, jump to fel

that's trying to boot from NAND, is that the intention?