[Arm-netbook] HDMI High-Frequency Layout: Recommendations--Taper

[Luke Kenneth Casson Leighton]

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68


On Fri, Jan 5, 2018 at 8:27 AM, Richard Wilbur <richard.wilbur at gmail.com> wrote:
> On Fri, Jan 5, 2018 at 1:00 AM, Luke Kenneth Casson Leighton
> <lkcl at lkcl.net> wrote:
>> On Fri, Jan 5, 2018 at 7:44 AM, Luke Kenneth Casson Leighton
>> <lkcl at lkcl.net> wrote:
>>
>>>  there's a few more like that back at the source diff-pair vias, i'll
>>> think about whether to drop a plain square keepout in place (to
>>> preserve 15mil) or a straight manual track.  track would cut clearance
>>> to around 12mil.  thoughts?
>>
>>  rectangular all-layers keepout, showing 1 and 3 here... damn layers 2
>> and 5 have a weird shape (not enough clearance auto-generated) let me
>> make it an oval all-layers keepout instead...
>
> Those do look very nice, indeed!

 did the trick.  pain doing them by hand, had to do the flood-fill,
then adjust the keepout, then write down by hand the distances that
the keepout fitted cleanly to the edges, _then_ throw that file away,
_then_ go back and put the rectangle left-right... bletch :)

 anyway i moved the PWM via up a bit, left the 3V3 VIAs where they
were - sorted.

l.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Untitled.jpg
Type: image/jpeg
Size: 36833 bytes
Desc: not available
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20180105/75eb2f6d/attachment-0001.jpg>