[Arm-netbook] apologies

[luke.leighton]

On Wed, Nov 13, 2013 at 11:40 AM, joem <joem at martindale-electric.co.uk> wrote:

> If the UART TX pin defaults to a high value, the
> pull up will still drive the EOMA.

 i think.... i think the pull-up needs to go on the other side of the diode.

> through the 68 pins. (Connecting to external 3.3V is no good -

 *sing-song* nooOOo, that's not good enough to say that: a solution
has to be found because that's what the situation is, end of story.

 l.