[Arm-netbook] rev0 a10 eoma68 board bringup

Hrvoje Lasic lasich at gmail.com
Tue Jan 1 10:21:14 GMT 2013


On Tue, Jan 1, 2013 at 1:05 AM, Troy Benjegerdes <hozer at hozed.org> wrote:

> On Mon, Dec 31, 2012 at 08:17:39PM +0000, luke.leighton wrote:
> > On Mon, Dec 31, 2012 at 6:25 PM, Troy Benjegerdes <hozer at hozed.org>
> wrote:
> > > On Mon, Dec 31, 2012 at 06:12:07PM +0000, luke.leighton wrote:
> > >> On Mon, Dec 31, 2012 at 5:29 PM, Simon Kenyon <simon at koala.ie> wrote:
> > >> > On 12/30/12 14:06, luke.leighton wrote:
> > >> >> as a second phase - after getting successful samples up and
> running -
> > >> >> we thought about doing a version of the board which is square-ish
> in
> > >> >> size which has a stack of connectors - RJ45, USB2, 5V Power etc.
> etc.
> > >> >> - which would be suitable for engineering and educational purposes.
> > >> >>
> > >> >> thoughts, advice and comments appreciated.
> > >> >
> > >> > could i suggest that all connectors go on one side of the PCB in
> order
> > >> > to be able to put it into a case without it looking like a spider
> > >>
> > >>  mmm.... well let's think this through.  connectors would be:
> > >>
> > >>  * micro-hdmi
> > >>  * micro-sd
> > >>  * micro-usb
> > >>  * RJ45 for ethernet
> > >>  * full-size USB x2
> > >>
> > >> anything else?
> > >
>

Hi,

I am new and did not introduce myself but we are working on some zigbee
project and would like to use A10 processors for some applications we will
have. One application that we will use is gateway between web and zigbee
networks. For this we will use board similar to yours but with zigbee
module. Zigbee modul is connected via SPI or I2C communication (We
constructed our zigbee modul that is now under testing). We plan to make
some open source software that we will try to be easy to use for anybody
interested in for example home automation. Also, you can do it via USB but
it might be ok  if you have some serial communication like RS485. This way
some engineer can use your board to communicate with any industrial
networks like BACNET or whatever.

Also, if you plan to use some enclosure I can help you to make 3d model.
This should not be to difficult to make.

Regards,

-- 
Hrvoje Lasić

<lasich at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20130101/b7581096/attachment.html 


More information about the arm-netbook mailing list