[Arm-netbook] EOMA-68 Carrier Board Concept

[Christopher Thomas]

On Fri, Aug 16, 2013 at 3:11 AM, luke.leighton <luke.leighton at gmail.com>wrote:

> On Fri, Aug 16, 2013 at 4:36 AM, Christopher Thomas
> <christopher at firemothindustries.com> wrote:
>
> > Saturday. These last ones will have a 24awg wire connecting Pins 1 and
> 11 on
> > the Ethernet Connector,  and a jumper for D1. (The delay was due to
> having
> > to retrofit each one.) (Luke, can you think of any other mods I should
> do?)
>
>  they're on the wiki page: the absolute absolute critical one because
> if it doesn't happen it will damagage the ethernet IC is to NOT
> install R2.  anyone who's plugged in the CPU Card with R2 shorting out
> the PWFBOUT line to GND is i believe unlikely to be able to use
> ethernet.
>
> Yeah, I left R2 off entirely on all of these.


> > And one last thing. My new FTDI Cable and Capacitors should arrive
> tomorrow,
> > so hopefully I can finally start testing the SATA issues.
>
>  awesome.
>
>

> > I did manage to
> > fix the broken uUSB connector, luckily the solder job was so bad that the
> > pins were barely held onto the pads and no damage was done.
>
>  irony....
>
>  yeah the production runs will be fully-automated - no hand-assembly
> whatsoever.
>
> l.
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk
>



-- 
Christopher Thomas
Firemoth Industries, LLC - Owner
christopher at firemothindustries.com
214-458-5990
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20130816/88e62f93/attachment-0001.html>