[Arm-netbook] 15in EOMA-68 laptop

[Hrvoje Lasic]

I think, if you refer to 15 inch hinges, they are tubular, at least in the
middle (important) part. If you open file you will see it. Pls note that
other parts we can modify easily. I am most concerned not to "invent"
mechanism that holds screen and body (especially as it has been invented
already). Part that is metal sheet  (that you maybe do not "understand") we
can adapt to our casing easily. These molds should be relatively cheap and
samples usually can be made without molds at some extra cost (which is not
important for samples). So, before mass production you assemble everything
in reality and make corrections where needed...

here is render so you can see:

http://www.sendspace.com/file/ipus8u

Anyway, if you made decision about LCD (at least we can picks some for
start) I can draw you preliminary casing based on your sketches and this
hinge.

Also, there is keyboard and track pad parts to be solved for lower body


On Thu, Apr 25, 2013 at 7:51 PM, luke.leighton <luke.leighton at gmail.com>wrote:

> On Thu, Apr 25, 2013 at 11:19 AM, Hrvoje Lasic <lasich at gmail.com> wrote:
> > From this supplier I got reference price 2.1 usd for pair (for 15 inch
> > laptop) based on 3d model they send me.
>
>  that's not bad.  i'm a little confused as to where these hinges go.
> i was hoping to do a design with a tubular friction-based hinge.
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk
>



-- 
Hrvoje Lasić
Tehnicka Radionica Zagreb d.o.o.
Brajkovićev prilaz 3
10000 Zagreb
Croatia
tel +385 1 6152 706
fax +385 1 6152 708
lasich at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20130426/435008f7/attachment.html