[Arm-netbook] going to try and build CM9 for my new A10 9.7" tablets

[simon at koala.ie]

oh! did not know that.
i have a dump of nanda which i took before i started this little venture.
thanks (yet again)

On Sun, 24 Jun 2012 11:42:18 +0100, Alejandro Martínez <zen at itram.es>  
wrote:

> On Sun, Jun 24, 2012 at 12:12 PM,  <simon at koala.ie> wrote:
>
>> - stick the microshdc in my laptop
>> - burn an image
>> - stick it in the tablet
>> - get an error in the burn
>> - try another image
>> - get that to install
>> - boot and discover that the touch pad doesn't work
>> - start again
>>
>> then you get an .img that does work and you discover that the camera and
>> the 3-axis sensor doesn't work.
>
>
> ¿Have you swapped the script.bin with the one from your tablet's
> firmware (i.e using adb)?
>
> Script.bin (and its copy script0.bin) are located on the partition on
> /dev/nanda (or /dev/block/nanda). You'll have to mount it.
> They control a lot of HW parameters so this is the main cause for
> things not working.
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk
>