[Arm-netbook] Mele A1000: SATA HD does not work

Nik0 nicolas.ebele at free.fr
Sat Jun 9 14:21:53 BST 2012


nik0 <nicolas.ebele <at> free.fr> writes:

> 
> David Given <dg <at> cowlark.com> writes:
> 
> > 
> > On 21/05/12 21:56, Nik0 wrote:
> > [...]
> > > Sorry to get back on this subject.
> > > I succeeded to tune the evb.fex to have the ethernet, usb and wifi working 
> but 
> > > my SATA drive is still not recognized.
> > > I have theses setting
> > > [sata_para]
> > > sata_used = 1
> > > sata_power_en = 
> > > 
> > > There is anything else to change ?
> > > Or is it a kernel problem ? How to check that ?
> > 
> > You might not be using a kernel that actually has the driver in it ---
> > if you look in /sys/class, do you see any directories starting 'ata_'?
> 
> You are right, there are no "ata_" 
> > 
> > FWIW, I didn't have to change the fex file to get SATA working, but I
> > did have to compile my own kernel with the driver in it.
> 
> I will do it. 
> There is already an existing image of it ?
> Can the SATA support be added afterward ?
> 
> Thanks,
> 
> Nik0

I am back again on the subject !!
I succeeded to compile and start my own kernel, using the branch allwinner-v3.0-
android-v2 ...
But when I install the sata module (sw_ahci_platform) I have this error:

<6>ata1: EH complete
<3>ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
<3>ata1: irq_stat 0x00000040, connection status changed
<3>ata1: SError: { DevExch }
<4>ata1: limiting SATA link speed to 1.5 Gbps
<6>ata1: hard resetting link
<6>ata1: SATA link down (SStatus 1 SControl 310)
<6>ata1: EH complete
<3>ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
<3>ata1: irq_stat 0x00000040, connection status changed
<3>ata1: SError: { DevExch }

I checked the internet, some guys report a cable error, but when I boot on 
Android I get this:

sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc 
scsi0 : sw_ahci_platform
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 56
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: native sectors (2) is smaller than sectors (1953525168)
ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
 


Any suggestions ?

thanks and regards,

Nik0







More information about the arm-netbook mailing list