[Arm-netbook] arm-netbook Digest, Vol 26, Issue 34

[lkcl luke]

On Sat, Aug 25, 2012 at 9:25 PM, Ershov Sergey <ershovu at gmail.com> wrote:

> lkcl luke, thanks for the replies!
> English is not my native - I apologize for the mistakes.

 no problem sah.

> How to place the component EOMA-68 ("Allwiner A10 edition") I do not
> understand.

 ahh, right - i get it.  ok.  this is a kicad question, which really
is best asked on the kicad forums, not on here.  but, briefly: to use
a "library", you have to go into the settings and add it to the
project.  *then* you can use it.

> I saw the library (http://git.rhombus-tech.net/?p=eoma.git; a = blob; f =
> pcb/allwinner_a10/library/allwinner.lib ;), I tried to find seats for the
> component EOMA-68 ("Allwiner A10 edition") on http://git.rhombus-tech.net -
> I could not find.

 i assume you've "git clone"'d that repository, yes?

> Now I'm trying to make a board for EOMA-68 ("Allwiner A10 edition") - the
> problem is that in addition to the connector pcmcia there are 2 additional
> connectors. Flat cables for connection greatly increases the cost in mass
> production.
>
> Maybe there is a reference design for "MiniEngineeringBoard"?

 not yet.

> Do not want to reinvent the wheel.

 you'd be the first.

> Or create component "card pcmcia EOMA-68 (Allwiner A10 edition)" to place on
> the board ...

 again, you'd be the first.  please do make sure you "git commit"
everything then we can work on adding what you're doing to the
repository, later, ok?

 l.