[Arm-netbook] CT-PC89E - success replicating boot from SDcard with switch in NON-factory-default setting

[Luke Kenneth Casson Leighton]

On Wed, Mar 24, 2010 at 4:11 PM, Adam Gill <madallig at gmail.com> wrote:
> OK i did this ....
>
>
> # dd if=./mmcblk0p1 of=/dev/mmcblk0 seek=3672000 bs=512 ... so i think the
> sd card is correct


>
>
> But nothing happens when i try to boot the ct-pc89e

 ahh, frick.  and you connected the wires that do the
"non-factory-default" setting?

> any other suggestions .... ?

 i think sadly it may be the case that your machine's fscked.

 when jon has some time next week you might want to get together with
him, see if you can try his sd-card, but... i'd say, honestly, think
about sending it back to chitech if you want it working.

 l.