[Arm-netbook] Booting from SD card with switch on so-dimm in other direction ...

[Adam Gill]

Please conform it is these two point to short??

Adam



Luke Kenneth Casson Leighton wrote:
> On Tue, Mar 23, 2010 at 11:03 AM, Adam Gill <madallig at gmail.com> wrote:
>   
>> That's really great!!
>>
>> I coul'nt wait  ...so i have dismantled my netbook .... but have no switch
>> :-(  on so- dimm ...
>>
>> Need shorting weiring diagram to solder on wires ...
>>     
>
>  bottom right, where marked SW100.  the two tracks that are vertical,
> one to the left of the word "R46", one to the right.  solder a wire
> between those two.  if you make it two wires, and you don't mind bits
> of sellotape, you could twist the ends together, cover them in
> sellotape so that there's flat-out zero chance of shorting anywhere on
> the main PCB, make damn sure that there's no strands which could poke
> through.  or, heck, just solder them.  then you can disconnect at
> will.
>
>  how the heck they managed to get the NAND programmed without that i
> really don't know.  probably manually shorted them out, putting it in
> a special developer-kit SO-DIMM holder or something.  *shrug*.
>
> l.
>
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20100323/49164fdb/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P1010506 (Large).JPG
Type: image/jpeg
Size: 109314 bytes
Desc: not available
Url : http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20100323/49164fdb/attachment-0001.jpe