Where can the code be found? I probably can't do anything valuble with it but so far curiosity hasn't killed this cat :)
/fuumind
lör 2016-07-23 klockan 17:28 +0100 skrev Luke Kenneth Casson Leighton:
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma 68
On Sat, Jul 23, 2016 at 4:52 PM, Albert ARIBAUD <albert.aribaud@free. fr> wrote:
Hi Luke,
Le Tue, 19 Jul 2016 17:44:17 +0100 Luke Kenneth Casson Leighton lkcl@lkcl.net a écrit:
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Tue, Jul 19, 2016 at 11:30 AM, Albert ARIBAUD albert.aribaud@free.fr wrote:
Hi all,
Just did a quick "git push" to test that I can actually push onto the EOMA-68 EC firmware repo. Changes are trivial: on branch master, I just did some cleanup of main.c; more to come soon.
awesome. btw please don't remove things that are commented out, #if 0 them out instead - they're usually there for some sort of debug or experimentation purposes.
I'll put them back, see below.
thanks albert
Still, some conditionally compiled code *can* be cleaned up. One obvious example is the code in main.c which sets up the system tick: we know the EC microcontroller is going to be the STM32F072 no matter what, so __ARM_ARCH_6M__ is going to always be defined and we can do away with the inner #if/#else/#endif; and we need the system tick, so the outer #if 1 / #endif can go away too.
can't remember why i put it in...
also: there is a chromebook using the STM32F072 with keyboard controller firmware as well, it's quite hard to understand.
Noted, thanks.
one major thing that needs doing is to add a 2nd USB-HID "mouse" endpoint, starting possible with the mouse usb-hid example which makes the cursor move backwards and forwards. i happen to have a dual-keyboard-and-mouse logitech thing so the dual endpoint is attached just so we don't lose track... i'll also add it here
http://rhombus-tech.net/community_ideas/laptop_15in/pcb2/usbhid. txt
Thanks. I'll add that to my TODO list. :)
:)
Also, I created a new branch, "aaribaud/nucleo-f072rb", for stuff which allow/help developing the EC firmware on the NUCLEO dev board. That branch is intended to stay rebased on top of "master".
Luke: right now I intend to keep on pushing onto master; but maybe you prefer that I push onto a dev branch (e.g. "aaribaud/master"), and from time to time you or I do a merge into master?
naah, haven't got time to mess about with branches, unless it's a really big rewrite that needs everyone to work *in* that branch.
OK -- I'll rollback my initial change and commit back a version with test code kept in (and timer tick code simplified).
awesome
BTW, I now have the keyboard, and have soldered the FPC connector to a breakout flat wire ribbon which I will be able to connect to the board!
yay!
Of course, I goofed up when I set out soldering, and every pair of wires on the ribbon is swapped, i.e. FPC pin #1 is ribbon wire #2, FPC pin #2 is ribbon wire #1, FPC pin #3 is ribbon wire 4, FPC pin #4 is wire #3, etc... :)
aw doh
Still, despite my terrible soldering inability, no wire is cut or shorted to another one, so as long as I keep the swapping in mind while plugging the ribbon's wires onto the board, everything should work fine. :)
looking forward to hearing how you get on man
l.
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to arm-netbook@files.phcomp.co.uk