--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Thu, May 11, 2017 at 4:32 PM, Ismo Väänänen ismo.vaananen@gmail.com wrote:
Wouldn't the PCMCIA card thickness be an issue when using a CPU module?
According to the mechanical drawing on page 32 of the v1.0 GR8 datasheet the SoM is at maximum 1.12mm thick. This should fit nicely inside even the 3.5mm typeI EOMA68 case. https://github.com/NextThingCo/CHIP_Pro-Hardware/blob/master/Datasheets/GR8_...
that's the SoC itself. the "mechanical drawing" for the CHIP_PRO v1.0 module states that it's a total of 5.2mm in height. TOP component clearance is 1.4mm, there's an OTG connector on it which will be... 2.5mm or so... no idea.
actual dimensions are 45 x 30mm so yes _easily_ fits length-height-wise into the 78.1 x 43.something size of an EOMA68 PCB.
l.
-Ismo
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to arm-netbook@files.phcomp.co.uk