Hi, It looks like power schema I expect that is already been done. But a current design is still not fully clear to me. I will probably print the schematics PDFs on large A3 sheets tomorrow and try to find out how the Libre internals are interconnected currently..
Thanks
2016-03-02 16:59 GMT+01:00 Luke Kenneth Casson Leighton lkcl@lkcl.net:
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Wed, Mar 2, 2016 at 1:43 PM, Luke Kenneth Casson Leighton lkcl@lkcl.net wrote:
argh - the bq2419x series only provides up to 1.5A @ 5V in USB-OTG mode, not 3A. which rules it out. it's otherwise perfect, damnit.
ok, i thought about this, and i reckon that it'd be ok to do this:
- use the USB-OTG "boost mode" to provide USB-OTG power to the EOMA68
CPU Card [only]
- put the SYS-V output through to the main PCB1, where it will do
boost conversion to 5.0V for USB ICs. SYS-V output could go directly into the step-up converter for the LCD backlight, and also directly into the 3.3v regulator.
so... the spec doesn't change, just the implementation of PCB1.
l.
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to arm-netbook@files.phcomp.co.uk