Out of curiosity has anyone ever attempted to prototype a hardware block based on evolution principles? Doing it on an fpga is probably a bad idea since we wont be able to implement the results in more copies but this could potentially also happen in a software simulation where the input and output interfaces of the hardware block are pre defined On Apr 28, 2017 2:47 PM, "mike.valk@gmail.com" mike.valk@gmail.com wrote:
2017-04-28 13:23 GMT+02:00 Luke Kenneth Casson Leighton lkcl@lkcl.net:
On Fri, Apr 28, 2017 at 11:29 AM, mike.valk@gmail.com mike.valk@gmail.com wrote:
The problem is MUXing all modes to a single output. New Apple laptops
have
USB-C but not all ports support all functions.
Perhaps a bit of FPGA could be the key?
yeah.
Ethernet over UCB-C is still being discussed. So the FPGA might be
handy to
have when/if that mode is materialized.
A bit of FPGA would be nice to have anyway. Media codecs keep on
changing
and would extend the life of the SoC.
at the expense of power consumption.
If you're trying to trans-code something that you don't have a co-processor/module for you're forced to CPU/GPU trans-coding. Would a FPGA still be more power huns gry then?
I think/hope FPGA's are more efficient for specific tasks then CPU/GPU's
We can always have evolution create a efficient decoder ;-) https://www.damninteresting.com/on-the-origin-of-circuits/ http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1. 50.9691&rep=rep1&type=pdf
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to arm-netbook@files.phcomp.co.uk