[Arm-netbook] EOMA Standard

[Luke Kenneth Casson Leighton]

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68


On Mon, Jan 22, 2018 at 11:32 PM, Richard Wilbur
<richard.wilbur at gmail.com> wrote:
> As I was reading the EOMA standard[*] in the section entitled "Interoperability Restrictions imposed by height limits", I came across a statement
>
> Type III 8.0mm cards must be actively prevented from slotting into Type I (5.0mm) Housings by ensuring that there is a physical slot in the casework that is no more than 5.5mm in height.

 yep.

> which I think would probably reflect your meaning better if rewritten as follows:
>
> Type III 8.0mm cards must be actively prevented from slotting into Type II (5.0mm) Housings by ensuring that there is a physical slot in the casework that is no more than 5.5mm in height.
>
> Because the previous paragraph dealt with restrictions on Type I Housings (which accept 3.3mm high cards) and this mentions 5.0mm cards (which correspond to Type II).

 ok it should be prevented from fitting into both Type I *and* Type II.

 l.