[Arm-netbook] microdesktop casework as DXF files for laser-cutting

[Mark Van den Borre]

...of the board obviously. Even that took time fiddling with the (mesh)
stl...

Some very friendly people in irc.freenode.net#freecad helped me out.

Regards,

Mark

2017-03-21 23:23 GMT+01:00 Mark Van den Borre <mark at lusis.eu>:

> Hello Luke, hello list,
>
> Here's a FreeCAD solid model:
>
> http://glasno.st/microdesktop_model2.fcstd
>
> Kind regards,
>
> Mark
>
> 2017-03-21 21:54 GMT+01:00 Luke Kenneth Casson Leighton <lkcl at lkcl.net>:
>
>> On Tue, Mar 21, 2017 at 7:45 PM, Joseph Honold <mozzwald at gmail.com>
>> wrote:
>> > On 03/21/2017 02:42 PM, Jonathan Frederickson wrote:
>> >> On Tue, Mar 21, 2017 at 3:10 PM, Luke Kenneth Casson Leighton
>> >> <lkcl at lkcl.net> wrote:
>> >>>  ok done.
>> >>>
>> >>>  http://hands.com/~lkcl/eoma/tablet/3dcase then you should find
>> >>> microdesktop_model2.stl
>> >>
>> >> http://hands.com/~lkcl/eoma/tablet/3dcase 404s here, and
>> >> http://hands.com/~lkcl/eoma/microdesktop/ (which was my next guess)
>> >> doesn't have a '3dcase' directory or 'microdesktop_model2.stl' file.
>> >>
>> > This appears to be the correct link:
>> >
>> > http://hands.com/~lkcl/eoma/kde_tablet/3dcase/
>> > http://hands.com/~lkcl/eoma/kde_tablet/3dcase/microdesktop_model2.stl
>>
>>  thx for raising (and finding) that.
>>
>> _______________________________________________
>> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
>> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
>> Send large attachments to arm-netbook at files.phcomp.co.uk
>>
>
>
>
> --
> --
> http://lusis.eu
> full service b2b laser cutting
>



-- 
--
http://lusis.eu
full service b2b laser cutting
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20170321/14e6a9f8/attachment-0001.html>