[Arm-netbook] HDMI High-Frequency Layout: Recommendations

[mike.valk at gmail.com]

2017-08-10 10:45 GMT+02:00 Luke Kenneth Casson Leighton <lkcl at lkcl.net>:
> On Thu, Aug 10, 2017 at 9:38 AM, mike.valk at gmail.com
> <mike.valk at gmail.com> wrote:
>> 2017-08-10 10:18 GMT+02:00 Luke Kenneth Casson Leighton <lkcl at lkcl.net>:
>>> On Thu, Aug 10, 2017 at 9:01 AM, mike.valk at gmail.com
>>> <mike.valk at gmail.com> wrote:
>>>> 2017-08-09 15:23 GMT+02:00 Luke Kenneth Casson Leighton <lkcl at lkcl.net>:
>>>> Make sure the'res as much solid GND on the layer above and below the
>>>> traces, again shielding.
>
> 1. SIG1 + components
> 2. Ground
> 3. SIG3
> 4. POWR
> 5. Ground
> 6. SIG6 + componnents
>
That work's as well. But the enclosure should shield very well. And
there should not be a HF signals on layer 3.