[Arm-netbook] Solid wood corner prototype

[Tor, the Marqueteur]

Thought I'd give a try at how a solid wood version would come out.  Here
is the result of about 45 minutes prototyping with a piece of 3/8" Cherry
I had lying around.

A couple notes:  The 5/64" (.078", 1.98mm) bit has some tendency to
wander, as can be seen in the holes.  I also goofed the measurement so
these are 11/16" instead of 9/16" wide.  I didn't notice that until I was
nearly done, and figured that since they weren't actually going to be
used it didn't matter.

I also didn't add the slot for the PCB, mostly because I wasn't sure of
the size, and I didn't have the appropriate cutter lying close by.  I
have a couple thoughts on that.

Tor

-- 
Tor Chantara
http://www.fineartmarquetry.com/
808-828-1107
GPG Key: 2BE1 426E 34EA D253 D583 9DE4 B866 0375 134B 48FB
      *Be wary of unsigned emails*
Stop spying: http://www.resetthenet.org/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: microdesktop-corner-cherry.jpg
Type: image/jpeg
Size: 93404 bytes
Desc: not available
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20170429/ef01417e/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20170429/ef01417e/attachment-0001.sig>