[Arm-netbook] libre laptop 3d print run 90% done

[Luke Kenneth Casson Leighton]

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68


On Mon, Jan 18, 2016 at 2:38 AM, Alexander .S.T. Ross
<maillist_arm-netbook at aross.me> wrote:
> Looking forward to seeing how this turns out.
>
> I’ve been considering having a go at printing it my self, at a hacker
> space... I see how you get on. For whats i be letting my self in for ;)

 you'll need about... 10 metres of ABS @ 3.0mm and about 15 metres of
PLAY @ 3.0mm.  if using 1.75mm adjust accordingly.

> was this answered somewhere prev?:
> For the crowd fund. Will all the laptops be home printed and trimmed or
> is there, a mass printing operation that’s done differently from a home
> printing? Hows it going to be done?

 don't know yet.  i'm certainly not going to be doing 250-1000 sets of
3D-printed parts on a single mendel90, i have better things to do than
"explore that space" as the zen buddhists like to put it.  last time i
checked there exist online networked 3d printing websites in china
that offer massive discounts due to huge bulk-purchasing of the raw
materials.

> thanks again for the updates. ive been reading them! :D

 :)