[Arm-netbook] adafruit spi lcd hx8357d and arduino uno

[Hrvoje Lasic]

Looks good, what is the price for this lcd?

On Thursday, October 29, 2015, Luke Kenneth Casson Leighton <lkcl at lkcl.net>
wrote:

> .... arrived today, and were up and running, working perfectly, in
> under 15 minutes:
>
> http://git.rhombus-tech.net/?p=eoma-firmware.git;a=tree;f=eoma68/arduino_uno_spi_test
>
> i used a makefile that was easily found with a google search "debian
> arduino uno makefile", followed the instructions _in_ the makefile,
> created a blink test, ran it, ran "make upload" and it worked.  total
> time: well under 3 minutes.  next was the SPI-based LCD, soldering
> took a few minutes, copying the library files into the main directory
> a few more - done.
>
> i've now modified the adafruit source code so that it can do 9-bit SPI
> bit-banging, by setting "IM1=0" (shorting that to ground) and i'm now
> in a position to begin two-way testing of the adafruit LCD with an
> STM32F072, and the yunlea HX8357D LCD with the arduino uno.
>
> this is a heck of a lot quicker than messing about with both unknown
> hardware and unknown software.
>
> l.
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk <javascript:;>
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk <javascript:;>



-- 
Hrvoje Lasić
Vulpes d.o.o.
Gračanska 120a
10000 Zagreb
Croatia
tel +385 1 6152 706
tel +38598 450 603


*lasich at gmail.com <lasich at gmail.com>hrvoje at vebbu.co <hrvoje at vebbu.co>*

*www.vebbu.co <http://www.vebbu.co>*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20151029/388ba905/attachment.html>