[Arm-netbook] [flying squirrel] TODO list

Arokux X arokux at gmail.com
Sat Sep 28 18:43:48 BST 2013


On Sat, Sep 28, 2013 at 7:39 PM, luke.leighton <luke.leighton at gmail.com> wrote:
> On Sat, Sep 28, 2013 at 6:25 PM, Arokux X <arokux at gmail.com> wrote:
>> On Sat, Sep 28, 2013 at 7:10 PM, luke.leighton <luke.leighton at gmail.com> wrote:
>
>> because it is the only device on this hub, so you'll save power.
>
>  normally yes, but in this case there is a 4-port USB hub on the
> flying squirrel PCB.  if that gets disconnected it fucks with the
> whole tablet.

the hub was normally behind the first USB Host controller.

>> you
>> can also try rtlwifi driver it works, so maybe no need to use a
>> Realtek's ugly one?
>
>  will take a look.  what's it called?  i'm not seeing any options
> named "RTLWIFI" in the 3.4 sunxi config.  there's RTL8150 though.

The option is called CONFIG_RTL8192CU. It have a few dependencies.

>  l.
>
>  p.s. yaay!
>
>  wlan0     Scan completed :
>           Cell 01 - Address: 00:8E:F2:B7:12:2A
>                     ESSID:"virginmedia"
>                     Protocol:IEEE 802.11bg
>                     Mode:Master
>                     Frequency:2.427 GHz (Channel 4)
>                     Encryption key:on
>                     Bit Rates:54 Mb/s
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk



More information about the arm-netbook mailing list