[Arm-netbook] eoma68-a20 ethernet testing

[luke.leighton]

On Wed, Sep 4, 2013 at 3:03 PM, joem <joem at martindale-electric.co.uk> wrote:
>
>> > sunxi-tools don't work at the moment:
>> >
>> > gcc -g -O0 -Wall -Wextra -std=c99 -D_POSIX_C_SOURCE=200112L -Iinclude/
>> > `pkg-config --cflags libusb-1.0`  -o fel fel.c  `pkg-config --libs
>> > libusb-1.0`
>> > Package libusb-1.0 was not found in the pkg-config search path.
>> > Perhaps you should add the directory containing `libusb-1.0.pc'
>> > to the PKG_CONFIG_PATH environment variable
>> > No package 'libusb-1.0' found
>> > Package libusb-1.0 was not found in the pkg-config search path.
>> > Perhaps you should add the directory containing `libusb-1.0.pc'
>> > to the PKG_CONFIG_PATH environment variable
>> > No package 'libusb-1.0' found
>>
>>  ok, then apt-get install libusb-1.0-dev  (ok on debian it's libusb-1.0-0-dev)
>>
>>  i'll update the page accordingly.
>
> 100%
>
>
> uboot and sunxi-tools now cross compiles on ubuntu 12.04.3:

 great - then you're good to go.

 put the cpu card into FEL mode, then run the usb-boot command and
then try out those setenv and the ping commands.

 remember you've got a couple of ways to get into FEL mode - a)
short-out the U-Boot jumper b) press "2" on the RS232 console when
booting up.

l.