[Arm-netbook] [flying squirrel] TODO list

[luke.leighton]

well... this is _sort_ of progress... a 1.5k resistor is missing from
the USB+ line on the STM32F, which, when added, resulted in the exact
same error being created when the exact same software was uploaded to
the Port103R demo board.

at this point it can be reasonably concluded that the STM32F software
being uploaded to both boards, to get USB working, is shagged.  which
is odd, because i had it working a few weeks back [on the Port103R].

l.

Oct  2 16:05:41 localhost kernel: [2829651.641936] usb 1-1.4: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Oct  2 16:05:41 localhost kernel: [2829651.641943] usb 1-1.4: Product: HID Demo
Oct  2 16:05:41 localhost kernel: [2829651.641948] usb 1-1.4:
Manufacturer: Black Sphere Technologies
Oct  2 16:05:41 localhost kernel: [2829651.641953] usb 1-1.4: SerialNumber: DEMO
Oct  2 16:05:41 localhost kernel: [2829651.643699] input: Black Sphere
Technologies HID Demo as
/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.4/1-1.4:1.0/input/input55
Oct  2 16:05:41 localhost kernel: [2829651.643903] generic-usb
0003:0483:5710.0030: input,hidraw7: USB HID v1.00 Mouse [Black Sphere
Technologies HID Demo] on usb-0000:00:1d.7-1.4/input0
Oct  2 16:05:42 localhost kernel: [2829652.924274] usb 1-1.4: reset
full-speed USB device number 72 using ehci_hcd
Oct  2 16:05:42 localhost kernel: [2829652.996291] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:42 localhost kernel: [2829653.172291] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:42 localhost kernel: [2829653.348275] usb 1-1.4: reset
full-speed USB device number 72 using ehci_hcd
Oct  2 16:05:42 localhost kernel: [2829653.420284] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:43 localhost kernel: [2829653.596291] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:43 localhost kernel: [2829653.772290] usb 1-1.4: reset
full-speed USB device number 72 using ehci_hcd
Oct  2 16:05:43 localhost kernel: [2829654.180018] usb 1-1.4: device
not accepting address 72, error -32
Oct  2 16:05:43 localhost kernel: [2829654.252288] usb 1-1.4: reset
full-speed USB device number 72 using ehci_hcd
Oct  2 16:05:44 localhost kernel: [2829654.660048] usb 1-1.4: device
not accepting address 72, error -32
Oct  2 16:05:44 localhost kernel: [2829654.661392] usb 1-1.4: USB
disconnect, device number 72
Oct  2 16:05:44 localhost kernel: [2829654.760280] usb 1-1.4: new
full-speed USB device number 73 using ehci_hcd
Oct  2 16:05:44 localhost kernel: [2829654.832266] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:44 localhost kernel: [2829655.008394] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:44 localhost kernel: [2829655.184394] usb 1-1.4: new
full-speed USB device number 74 using ehci_hcd
Oct  2 16:05:44 localhost kernel: [2829655.256412] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:44 localhost kernel: [2829655.432267] usb 1-1.4: device
descriptor read/64, error -32
Oct  2 16:05:45 localhost kernel: [2829655.608391] usb 1-1.4: new
full-speed USB device number 75 using ehci_hcd
Oct  2 16:05:45 localhost kernel: [2829656.016073] usb 1-1.4: device
not accepting address 75, error -32
Oct  2 16:05:45 localhost kernel: [2829656.088262] usb 1-1.4: new
full-speed USB device number 76 using ehci_hcd
Oct  2 16:05:46 localhost kernel: [2829656.496048] usb 1-1.4: device
not accepting address 76, error -32
Oct  2 16:05:46 localhost kernel: [2829656.496420] hub 1-1:1.0: unable
to enumerate USB device on port 4