[Arm-netbook] apologies

[luke.leighton]

On Tue, Nov 12, 2013 at 7:51 PM, joem <joem at martindale-electric.co.uk> wrote:
>> Try this :) it popped up on Google pretty quickly -->
>> http://www.hobbytronics.co.uk/schottky-logic-level-conversion
>
> : awesome.  done.  added to spec.
>
> Same problem - access to the 3.3V power line inside the EOMA needed.

 no it is not.  TTL 3v logic is somewhere around 2v for low. a small
reduction (such as using another shottky diode) would be enough.

> Anyway - 3rd diagram added - modified version of Henrik's diagram for the EOMA:
> http://www.gplsquared.com/eoma_boot/eoma_boot.html#uart_repair

 great.  1.8+3.3=5.1 so the pull-up would be to 3.23V - enough to be
definitely below 3.3v.

l.