[Arm-netbook] rev0 a10 eoma68 board bringup

[Hrvoje Lasic]

>
>  apologies: one of the reasons why the parts are much cheaper than
> elsewhere (e.g. Molex) is precisely because there are no 3D CAD/CAM
> drawings available.  so rather than having a $1.00 part for micro-hdmi
> we have a $0.30 part, and so on.
>
>  everything therefore needs to be made from scratch and/or as you say
> from generic 3d models (then modified).
>
>
> http://hands.com/~lkcl/eoma/allwinner/micro_hdmi_mid_mount_type_d_amphenol_1042465.pdf
>
> http://hands.com/~lkcl/eoma/allwinner/litkconn_MICRO%20SD%20PUSH-PUSH%20A.pdf
>
> http://hands.com/~lkcl/eoma/allwinner/CNF004%20MICRO%20USB%20%205PIN%20AB%20type%20FEMALE%20%e6%b2%89%e6%9d%bf0.7_%e6%88%90%e5%93%81%e5%9b%be%20Model%20(1).pdf
>  http://hands.com/~lkcl/eoma/allwinner/PCFSTR-K-RE01-B01A1.pdf
>
>  the only consolation is that this will not - pretty much ever - need
> to be done again - not for any other EOMA-68 CPU Card, not ever.  not
> unless the components go end-of-life, cows come home, or there's a
> need for different connectors.
>
>

These guys at least give pdf.  For all connectors you can find probably
generic 3d models like for micro usb example is:

http://grabcad.com/library/micro-usb-47346-0001-reference

this you can use in constructing PCB model or even adapt to PDF that you
have.

For PCMIA, reconstructing from PDF will not be good. Here you are talking
in 0.1-0.2 mm precision. Can you give me contact so I can try to ask for
part model?
<lasich at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20130102/db155041/attachment.html