[Arm-netbook] EOMA-68 A20 CPU CARD + MEB ETHERNET IS WORKING!!

[luke.leighton]

confirmed working here, too chris.  tried the other card that i've got
- worked absolutely fine.  so that would a) confirm that the MEB (with
R2 gone and 1-wired-to-11) ethernet works b) confirm that the 1st CPU
Card sample i've got has something wrong with it.

l.

root at debian:~# ping  192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=1.51 ms
64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=1.38 ms
^C
--- 192.168.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 1.386/1.451/1.516/0.065 ms
root at debian:~# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 3e:fd:e1:d2:ed:c3
          inet addr:192.168.0.10  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::3cfd:e1ff:fed2:edc3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:842 (842.0 B)  TX bytes:1238 (1.2 KiB)
          Interrupt:87 Base address:0xe000

root at debian:~#