[Arm-netbook] eoma26-a10s

[Ajith Kumar]

On Sat, Aug 24, 2013 at 12:15 AM, luke.leighton <luke.leighton at gmail.com>wrote:

> ok, thank you to tom for mentioning that the a10s was better suited to
> an eoma26 cpu card than the a13, i've started doing a GPL'd kicad
> layout for it.
>

Something done in KiCAD for A10 is available.

> https://github.com/expeyes/expeyes-programs/tree/master/SBC
>

http://www.iuac.res.in/~elab/phoenix/SBC/

Joe has got the first version assembled, but the AXP209 could not be placed
due to a footprint error, the board need to be powered
by feeding the DC levels externally, 1mm test points are available on for
that.


Ajith




> i spoke to joe, and he said that as an engineering board an
> eoma26-a10s with a FPC expansion header would be much more interesting
> in small volumes.
>
> question: of the available interfaces and pins on the a10s, which ones
> would people be interested to see put out on say a limited 40-pin FPC
> connector?
>
> (space is *really* tight btw - so i don't want to make it any bigger)
>
> l.
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk
>



-- 
Dr. Ajith Kumar B.P.
Scientist SH
Inter-University Accelerator Centre
Aruna Asaf Ali Marg
New Delhi 110067
www.iuac.res.in
Ph: (off) 91 11 26893955 (Ext.230)
      (res)91 11 26897867
      (mob) 91 9868150852
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20130824/3d633391/attachment.html>