[Arm-netbook] SHIPPING!: EOMA-68 Micro Engineering Boards

[luke.leighton]

On Sat, Aug 10, 2013 at 11:11 AM, luke.leighton <luke.leighton at gmail.com> wrote:
> ok, right.
>
> list of modifications required so far:
>
> * remove R2
> * short out D1 and MAKE SURE YOU USE EXACTLY 5.0V power
> * put a wire between pin 1 and pin 11 on the underside of the PCB, on J4.

 i've added a note here:

 http://rhombus-tech.net/community_ideas/micro_engineering_board/

> l.