[Arm-netbook] SHIPPING!: EOMA-68 Micro Engineering Boards

[luke.leighton]

On Fri, Aug 9, 2013 at 3:33 AM, Christopher Thomas
<christopher at firemothindustries.com> wrote:
> Looking at the A10/A20 schematics for the RTL8201CP, has the EthPHY
> interface been tested via a conventional 10/100 RJ45 w/ external transformer
> and circuit?

 noooO.... because the MEB _is_ the test board :)

> Also, comparing the script.FEX files of other A10 boards with the RTL8201CP
> vs the eoma68A10 and A20, they are missing EMAC_POWER and EMAC_LINK, not

 the RTL8201CP is always powered-up.  EMAC_LINK.... ahh... frickin
'ell, don't tell me that's a hard-wire to notify that the link is up.


> Researching this further... On the EOMA A20 Fex, PB11 is not assigned to
> anything, yet on my working Hackberry, it's assigned to EMAC_LINK. And then,
> EMAC_POWER is assigned to PH19 on the working A10 boards, but assigned to
> LCDD19 under LCD1 config section on both EOMA cards. I

 ok i'll check that.