[Arm-netbook] could some kind person guide me through the process of build andoid for the Mele?

[Simon Kenyon]

On 07/08/12 12:10, simon at koala.ie wrote:
> On Sat, 07 Jul 2012 17:56:37 +0100,<simon at koala.ie>  wrote:
>
>> On Fri, 06 Jul 2012 14:01:33 +0100, Alejandro Mery<amery at geeks.cl>  i
>> have built cm9 (after a few bumps in the road)
>> i've installed the recovery.img on /dev/block/nandf and can boot into it.
>> it cannot see the sdcard but it can see the "internal" sdcard.
>> but when it tries to install if fails with no errors in the log
>
> it would appear that the binary that goes into the recovery.img is not
> able to read the sdcard.
> i really don't know why.
>
> i have traced the binary back through github and there is no indication
> where the source of this is located.
>
> anyway, i have a workaround. i can go into recovery with adb and mount a
> USB key:
>
> mount -t vfat /dev/block/sda1 /sdcard
>
> and install cm9 from there.
>
> the touchscreen on the device i'm using for my experiments (yes i know i
> said i was doing this on a mele :-|) does not work.
>
> of course cm9 has disabled root access. one quick hack on su.c and a
> rebuild later and i can boot into cm9 and try to work out why things are
> not working.
>
> two steps forward and one step back.
>
> now rebuilding the kernel time after time to see what touchscreen hardware
> i have.
>
well that did not get me very far.
i have rebuilt the kernel a couple of times.
it seems that my tablet uses a few drivers that i do not have source 
for. will do so more investigation tomorrow.

thanks for all he help
--
simon