[Arm-netbook] Request SD card image

[Alejandro Martínez]

The 3.0.8+ kernel used seems to have some issues, the kernel modules
for i.e the WiFi module don't seem to match the kernel also.

I'll try to compile a 2.6.36 (given that it is the only one "released"
we have fully working) and try with that one.


Alejandro

On Sat, Apr 21, 2012 at 12:40 PM, Dawid Wrobel <me at dawidwrobel.com> wrote:
> Paul Kench <paulkench <at> yahoo.co.uk> writes:
>
>> Anyone know if the network is supposed to work? My interface comes up (says so
> in syslog) and then a second later the light goes out on the switch port, and
> syslog says link not ready.
>> I am deeply suspicious of network manager, could it be to blame?
> I disabled network-manager from booting and it didn't help. Networking works for
> just a while (IP leaseover DHCP) before it shut downs. ifconfig up doesn't help,
> neither do plugging the cable on and off.
>
> root at ubuntu:~# dmesg|grep wemac
> [    0.910000] wemac Ethernet Driver, V1.00 in
> file:drivers/net/sun4i/sun4i_wemac.c
> [    0.940000] wemac wemac.0: PHY SETUP, reg 0 value: 3100
> [    0.950000] wemac wemac.0: resetting device
> [    7.360000] wemac wemac.0: enabling eth0
> [    7.360000] wemac wemac.0: WARNING: no IRQ resource flags set.
> [    7.360000] wemac wemac.0: resetting device
> [    7.360000] wemac wemac.0: eth0: link down
> [   21.360000] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
> [   25.360000] wemac wemac.0: eth0: link down
>
>
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk