[Arm-netbook] UART

[Luke Kenneth Casson Leighton]

christoph, hi, thanks for the encouraging message - i've received this
as a bounce message, will forward it to list, but ideally you should
subscribe, hope that's ok.

l.


---------- Forwarded message ----------
From:  <arm-netbook-bounces at lists.phcomp.co.uk>
Date: Tue, Sep 27, 2011 at 12:11 AM
Subject: Auto-discard notification
To: arm-netbook-owner at lists.phcomp.co.uk


The attached message has been automatically discarded.

---------- Forwarded message ----------
From: f4eru <f4eru at free.fr>
To: arm-netbook at lists.phcomp.co.uk
Date: Tue, 27 Sep 2011 00:43:15 +0200
Subject: UART
Hello


This project is neat ! I will definitely buy some boards if ever there
will be a prod run.

a full fledged netbook with that interface would be nice also.


One thing lacking : as it could be used as a dev board, there should
be two GPIOS specifically defined a TX and RX for an UART (dual use)

In the same spirit, other GPIOS could be defined as dual use for PWMs,
SPI, whatever.
As every SOC has these capabilities, why not specify them to be used
in a standard manner ?


Gruss


F4ERU


--
Mit freundlichen Grüssen  -  Yours sincerely

Christoph Riehl