[Arm-netbook] GR8 based EOMA68 card
Luke Kenneth Casson Leighton
lkcl at lkcl.net
Sat May 13 17:14:45 BST 2017
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Thu, May 11, 2017 at 4:32 PM, Ismo Väänänen <ismo.vaananen at gmail.com> wrote:
>>Wouldn't the PCMCIA card thickness be an issue when using a CPU module?
> According to the mechanical drawing on page 32 of the v1.0 GR8 datasheet the
> SoM is at maximum 1.12mm thick. This should fit nicely inside even the 3.5mm
> typeI EOMA68 case.
that's the SoC itself. the "mechanical drawing" for the CHIP_PRO
v1.0 module states that it's a total of 5.2mm in height. TOP
component clearance is 1.4mm, there's an OTG connector on it which
will be... 2.5mm or so... no idea.
actual dimensions are 45 x 30mm so yes _easily_ fits
length-height-wise into the 78.1 x 43.something size of an EOMA68 PCB.
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> Send large attachments to arm-netbook at files.phcomp.co.uk
More information about the arm-netbook