[Arm-netbook] microdesktop casework as DXF files for laser-cutting

[Luke Kenneth Casson Leighton]

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68


On Wed, Mar 22, 2017 at 3:07 AM, Normand Chamberland <gemnoc at gmail.com> wrote:

> - USB connectors are 6.65mm high rather than 6
> - PJ-045 (thin tall one at rear extreme left?) is 11mm high rather than 9
> - VGA is 9mm
> - microSD slot (at the front under the board I presume) is 1.8mm rather than
> 2

 those are from the datasheets.  which will all be at
http://hands.com/~lkcl/eoma/microdesktop/ so we go with a 3mm
thickness.  6.65 is the height of the connector, meaning that 2 stacks
leaves enough room to fit the USB plug.

l.