[Arm-netbook] EOMA68-A20 2.7.4 pre-production prototypes received and working
fivepointpalmexplodingheart at gmail.com
Sun Jun 18 23:57:50 BST 2017
> Date: Thu, 15 Jun 2017 15:02:07 +0100
> From: Luke Kenneth Casson Leighton <lkcl at lkcl.net>
> it was discovered that the VIAs underneath the pads for the JAE DC3
> Micro-HDMI connector are sucking the solder paste in and down, leaving
> the pins not properly connected.
if anyone knows any tricks i would appreciate hearing them.
Can you enlarge the solder mask for these pads, thus providing enough
solder to both fill the via and make the connection?
This is the standard recommendation when using thermal pads / thermal vias.
More information about the arm-netbook