[Arm-netbook] EOMA68-A20 2.7.4 pre-production prototypes received and working
Luke Kenneth Casson Leighton
lkcl at lkcl.net
Sat Jun 17 10:22:24 BST 2017
On Sat, Jun 17, 2017 at 3:30 AM, David Niklas <doark at mail.com> wrote:
> How about a third?
> I'm no EE (I'd like to be, but that's another story), so take this with
> a grain of salt.
> Use kapton tape to cover the holes. That will resist the heat the down
> and up side being that you have to manually apply and remove it
> afterwards and it will not leave a trace like epoxy so you can use the
> VIA holes.
nice idea... *thinks*... the holes are 6mil (0.15mm) wide. i would
be concerned that tape would let air through, or would house an air
bubble underneath. if epoxy resin is a standard technique that's been
tried, tested and proven, i'd prefer it.
More information about the arm-netbook