[Arm-netbook] microdesktop casework as DXF files for laser-cutting

Luke Kenneth Casson Leighton lkcl at lkcl.net
Mon Apr 3 04:46:43 BST 2017


On Mon, Apr 3, 2017 at 3:01 AM, Luke Kenneth Casson Leighton
<lkcl at lkcl.net> wrote:

http://hands.com/~lkcl/eoma/kde_tablet/3dcase/microdesktop_6.png

top and bottom added: curved at the sides but not the front or back,
due to the fascia plates being too close to the edges (and straight,
so they could bend and thus potentially drop out if too close).

if they're too thick then the connectors won't fit.

have to think about the PCMCIA end because the card is flush with the
PCB and so the plate (at 1.5mm) means the card is embedded 1.5mm in,
making it difficult to get at and difficult to put in HDMI and OTG
cables.

needs more thought.

l.



More information about the arm-netbook mailing list