[Arm-netbook] EOMA68-A20 interface redesign

joem joem at martindale-electric.co.uk
Sat May 31 13:17:28 BST 2014


On Fri, 2014-05-30 at 21:39 +0100, Luke Kenneth Casson Leighton wrote:
> On Fri, May 30, 2014 at 9:13 PM, Boris Barbour <barbour at biologie.ens.fr> wrote:
> >
> > On 30/05/14 21:04, Luke Kenneth Casson Leighton wrote:
> >>
> >> so i*think*  we can go to 2gbyte of RAM.
> >
> >
> > Good news! It could be a reasonably capable machine.
> 
>  yeah.  now we have to test it, at least creating a batch of minimum 5
> CPU Cards.  just to be on the safe side, probably make 3 with 2Gbyte
> RAM and 2 with 1 Gbyte RAM.  i'm guessing we will need somewhere
> around $1.5k for 5 boards including components.
> 
>  joe if i get you the modified pcb layout can you handle getting this
> sorted (PCB printed, populated etc.)?

No problem, but remember, as company we still need the SATA.

It would be good if you can put in some wings that
can be broken off that has SATA and a lot more IO coming out
of FPC. The wings should be at the HDMI end because there
are a lot of PCMCIA cases with bulges at that end
for SATA, ethernet, wifi and so on.



More information about the arm-netbook mailing list