[Arm-netbook] SATA - ATAS

Arokux X arokux at gmail.com
Tue Sep 10 16:25:54 BST 2013


On Tue, Sep 10, 2013 at 5:21 PM, joem <joem at martindale-electric.co.uk>wrote:

> On Tue, 2013-09-10 at 15:59 +0100, luke.leighton wrote:
> > sorry, joe - you might have to do a "git pull", i might not have done
> > a git push this end :)
> >
> > check around like 95 of arch/arm/mach-sun7i/pm/standby/Makefile it
> should be:
> >
> > SUSPEND_LD_FILE = suspend.xn
> > RESUME1_LD_FILE = resume1.xn
> > RESUME0_LD_FILE = resume0.xn
> >
> > CC = $(CROSS_COMPILE)gcc-4.4
> >
> > #CFLAGS = -g -c -nostdlib -march=armv7-a -marm -fno-unwind-tables
> > -fno-asynchronous-unwind-tables -mlittle-endian
> > --min_array_alignment=4 --no_unaligned_access -O2
> > CFLAGS = -g -c -nostdlib -march=armv7-a -marm -D__STANDBY_MODULE__
> > -fno-unwind-tables -fno-asynchronous-unwind-tables -mlittle-endian -O0
> > #--min_array_alignment=4 --no_unaligned_access
> >
> >
> >
> > > cc1: error: unrecognized command line option "-fmin_array_alignment=4"
> > > cc1: error: unrecognized command line option "-fno_unaligned_access"
> >
> >  yep that's cos i didn't commit the Makefile corrections to use gcc 4.4.
>
> Thank you.
>
> I did git pull, and make clean and then tried to compile
> and went a lot further but got the messages here
> http://www.gplsquared.com/eoma_boot/compile_error3.txt
>
>
> The last few lines of the error were:
> arm-linux-gnueabihf-gcc-4.4 -I. -I/home/jm/code/eoma/linux/include
> -I/home/jm/code/eoma/linux/arch/arm/mach-sun7i/include  -g -c -nostdlib
> -march=armv7-a -marm -D__STANDBY_MODULE__ -fno-unwind-tables
> -fno-asynchronous-unwind-tables -mlittle-endian -O0  dram/dram_init.c
> -o dram/dram_init.o
> arm-linux-gnueabihf-ld -T resume1.xn
> -EL  ./super/common.o ./super/super_twi.o ./super/super_delay.o
> ./super/super_clock.o ./super/super_power.o ./super/super_tmr.o
> ./super/dram/dram.o ./super/dram/dram_init.o ./super/resume/resume1.o
> ./../mem_cpu.o ./../mem_mmu_pc.o ./../mem_mmu_pc_asm.o ./../mem_serial.o
> ./../mem_printk.o ./../pm_debug.o ./../mem_timing.o ./../mem_divlibc.o
> ./../mem_divlib.o -o resume1.elf  -Map resume1.map
> arm-linux-gnueabihf-objdump -D resume1.elf > resume1.lst
> arm-linux-gnueabihf-gcc-4.4 -I. -I/home/jm/code/eoma/linux/include
> -I/home/jm/code/eoma/linux/arch/arm/mach-sun7i/include  -g -c -nostdlib
> -march=armv7-a -marm -D__STANDBY_MODULE__ -fno-unwind-tables
> -fno-asynchronous-unwind-tables -mlittle-endian -O0  ./../mem_serial.c
> -o              ./../mem_serial.o
> arm-linux-gnueabihf-ld -T suspend.xn
> -EL  ./super/common.o ./super/super_tmr.o ./super/super_clock.o
> ./super/super_twi.o ./super/super_delay.o ./super/super_power.o
> ./super/suspend/suspend.o ./super/dram/dram.o ./super/dram/dram_init.o
> ./../mem_cpu.o ./../mem_mmu_pc.o ./../mem_mmu_pc_asm.o ./../mem_serial.o
> ./../mem_printk.o ./../mem_divlib.o ./../mem_divlibc.o ./../mem_int.o
> ./../pm_debug.o ./../mem_timing.o -o suspend.elf  -Map suspend.map
> arm-linux-gnueabihf-ld -T standby.xn  -EL  common.o standby.o
> standby_clock.o standby_ir.o standby_key.o standby_power.o standby_tmr.o
> standby_twi.o standby_usb.o standby_delay.o dram/dram.o
> dram/dram_init.o ./../pm_debug.o ./../mem_mmu_pc_asm.o ./../mem_serial.o
> ./../mem_printk.o ./../mem_divlibc.o ./../mem_int.o ./../mem_timing.o
> ./../mem_divlib.o -o standby.elf  -Map standby.map
> arm-linux-gnueabihf-objdump -D suspend.elf > suspend.lst
> arm-linux-gnueabihf-objdump -D standby.elf > standby.lst
> Segmentation fault (core dumped)
> make: *** [suspend] Error 139
> make: *** Waiting for unfinished jobs....
> Segmentation fault (core dumped)
> make: *** [standby] Error 139
> Segmentation fault (core dumped)
> make: *** [resume1] Error 139
> make: Leaving directory
>
Weired! objdump has crashed, it is not a compilation error...

>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20130910/8824f91e/attachment-0001.html>


More information about the arm-netbook mailing list