[Arm-netbook] SATA - ATAS
arokux at gmail.com
Mon Sep 9 16:46:09 BST 2013
On Mon, Sep 9, 2013 at 4:12 PM, joem <joem at martindale-electric.co.uk> wrote:
> > >> > From http://rhombus-tech.net/allwinner/a20/boot/
> > >> > When I run
> > >> >
> > >> > make -j3 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
> > >> > KDIR=~/src/a10/linux-sunxi/ -C arch/arm/mach-sun7i/pm/standby all
> > >>
> > >> the KDIR environment variable is a standard linux kernel environment
> > >> variable, which says "my (K)ernal (DIR)ectory is ~/src/....". so,
> > >> obviously, you have to adjust that for your setup.
> > >
> > >
> > > That is what got me confused - is the kernel sources sub directory not
> > > in the linux directory already?
> > there *is* no quotes subdirectory - it *is* the kernel sources.
> > > If its not in there, what am I
> > > downloading when I do git clone http://git.hands.com/linux.git ?
> > linux kernel sources. there is only linux kernel sources.
> Hmmmm.... going in circles - the instructions read:
> git clone http://git.hands.com/linux.git
> cd linux <----- so you are in the linux kernel sources directory
> git checkout -b lkcl-3.3-a20
> make -j3 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
> KDIR=~/src/a10/linux-sunxi/ -C arch/arm/mach-sun7i/pm/standby all
> At no stage in instruction at
> does it say where to download and set up
> linux-sunxi. Where is linux-sunxi directory? Why set KDIR again to
> something somewhere else like linux-sunxi
> if you are in the linux kernel directory already?
> That be why I am confused and going in circles.
I think you need to adjust KDIR so it points to your linux directory.
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> Send large attachments to arm-netbook at files.phcomp.co.uk
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the arm-netbook