[Arm-netbook] a10 eoma-68 rev0 sample arrived from wits-tech

[luke.leighton]

On Sat, Dec 15, 2012 at 8:30 PM, Henrik Nordström
<henrik at henriknordstrom.net> wrote:
> lör 2012-12-15 klockan 19:27 +0000 skrev luke.leighton:
>
>>  ack.  thanks henrik.  slight issue with the USB bus.   i may have to
>> get a JTAG programmer, check that the thing's actually responding.
>
> Are you sure the USB is not working?

 yep.  "device not accepting address".  but that's *after* it's
successfully been programmed apparently at least once with livesuite.

> It's pretty hard to fail that one
> with the PHY build in to the A10, only connector and ESD protection
> external, with the pins wired directly to the A10. Jumper for FEL mode
> and the device should show up in lsusb.

 i'll try that again.

> If it doesn't then the CPU is
> not properly powered or there is some major screwup.
>
> microSD not working either?

 don't know yet.  i'm setting up u-boot to output on UART3 - no output yet.

 l.