On May 20, 2017 7:47 PM, "Luke Kenneth Casson Leighton" <lkcl@lkcl.net> wrote:

remember that this *really is* the bare minimum - it'll be amazingly
an under $10 BOM. also that if you _did_ want to add HP and/or TV-out
and/or MIC sockets, as well as OTG.... you can't: there's not enough
room on the connector, not and have MicroSD as well. so you can do 3
out of 4 of those connectors but not all.

Could you modify the casework and put the microSD sideways, so it's only accessible when the card is not in a housing, and then have room for all the connectors?

I guess custom casework would be expensive, and could only make sense for high volume, but I just wondered if it even looks technically possible.

Benson