--- crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68
On Mon, Dec 26, 2016 at 6:00 PM, Internet internet@devpi.de wrote:
Hey, I am planning a custom project utilizing the EOMA68 standard
cool!
and I was wondering about VREFTTL.
ya.
What I have read so far (elinux.org) is that VREFTTL refers to the maximum voltage that can be applied to the GPIOs. My questions are though: Is VREFTTL always 3.3V
*NO* it's not.
or can it be lower?
between 1.8 and 3.3v, at the moment. anything lower will need to be negotiated in a FUTURE standard (and the "default" range of 1.8v to 3.3v will be respected, for older Housings. that means SoCs will need to have variable voltage power domains, but that's actually becoming quite common.
What should I do, if some ICs require a certain supply voltage
please do NOT make the mistake of using VREFTTL as a *SUPPLY* voltage. most (complex-function) ICs have a VDD (digital supply voltage) and a VCCIO. the VCCIO is what you connect to the VREFTTL. take a look at the SN75LVDS83b or the TFP401a for examples.
and VREFTTL does not meet the requirements?
find another IC that meets the variable-voltage 1.8 to 3.3v CMOS reference voltage or do level conversion.
Would it be necessary do level shifting in advance (to be compatible with other voltages)?
yyep. there's a number of ways to do it, dozens of ICs and circuits: the TXS0104 is great because it supports both open drain and push-push, you can use a MOSFET, or in some cases a straight diode will do (in a really counter-intuitive way, but it works). take a look on the rk3288 schematic PDF, look for the HDMI page, you'll find a suitable converter circuit using a MOSFET (and protection diode).
http://hands.com/~lkcl/eoma/rockchip_rk3288/
l.
How much current can I draw out of the computing card?
up to around 300mA. do *not* go beyond that.