Hello all,

I am coming to this forum trough that page: https://www.youmagine.com/designs/libre-hardware-licensed-parametric-laptop-design#activity--comment-create--6082 Thanks very much for this great work!

I am interested in EOMA68 project for several years. Althought I am currently using the ODROID boards in my projects - one example is radio meteor detection station: http://wiki.mlab.cz/lib/exe/fetch.php?media=cs:designs:rmds:rmds02d_station.jpg

This is a typical candidate of electronic computing device which needs occasional hardware upgrade or rapid firmware and configuration change.. Therefore I looking forward for moment when we could integrate the EOMA68 cpu card in our modular system http://www.mlab.cz/ and after that in to related designs which already exists.

Therefore you can count on me if there were a group order of EOMA68 cards or an crowdfunding campaign.

We have a long term electronics design experience and quite good contacts to other electronics manufacturers here in the Czech Republic. I would like to ask if there were some subtask which we could help with? If none, I will continue to work on related problems such as open-source battery management and effective solar charging system for portable devices.

But the cooperative development will be the best solution because there are huge tasks which we need to overcome. Uniform 3D printable laptop is one of the things which could bring together the open-hardware design community. I expected it even in case of Novena laptop, but they go to the different direction focused on performance needed for hacking.

Kaklik