On Thu, Dec 11, 2014 at 4:58 PM, Alexander Stephen Thomas Ross maillist_arm-netbook@aross.me wrote:
poor luke, my sympathies. thanks again for your hard work :)
appreciated. tough silly lessons all round.. now i know that for things like this, esp. where space is a premium, you absolutely must design the casework in conjunction with the PCB. so i'll be including generation of images and overlaying them onto blender as part of the iterative process.
the current plan is a full-length PCB with power jack on left, CPU card rotated *downwards* but with the rails over-reaching the edge of a much shallower PCB. headphones, USB and power button are currently all on the right.
the battery can then be a maximum of 6.0mm high, sitting to the right of the CPU card. it can be surprisingly big, taking up almost 50% of the space.
the LVDS converter PCB that sits on top of the LCD runs the full length of the LCD, and the rev 3.2 PCB sits flat directly on top of the LCD, clear of the LCD's PCB. LCD is 160x105, the LCD PCB is 160x35mm, and the rev 3.2 PCB is about... 175 x 70. i'm going to try to make that 175 x 63.
lots to sort out: i might have accidentally moved the touchpanel connector and camera connector, the positions of which are absolutely critical. have to work those out tomorrow.
so much to do!
l.