1. the usb otg charger ic has two capacitors between regn and ground, total value: 11.5uF, datasheet says 1uF. probably no issue though
2. 10k thermistor for the otg charger is connected to voltage divider and through another thermistor to bat-v (fuel guage), datasheet says it should be connected to ground (i am not to sure about the guage though, reference application is pretty chaotic and complex)
3. status leds should be connected to sys-v (nothing to do if dvcc = sys-v)
4. EOMA68-5V0 is not connected to anything, this results in an unpowered card on pcb1 (which is bad); should probably be connected to vcc-5v0)
5. level shifter is completely unnecessary because lcd-vcc = vrefttl = 3v3; connect 10k pullup resistors to vrefttl and add pullup for chg_irq to vrefttl
6. because eoma68-i2c is not used on this pcb remove pullups

I hope this helps and if I misunderstood something, please let me know. The fuel guage circuit is more complex than expected, I let you know if there is an issue.

Do you want me to put all this on rhombus-tech.net? If so, could you give me some instructions where and how to put it? Additionally, to edit the pages I need some kind of account creation password …

Julius Lehmann

---
crowd-funded eco-conscious hardware: https://www.crowdsupply.com/eoma68

On Sat, Feb 11, 2017 at 1:33 PM, Internet <internet@devpi.de> wrote:

You are absolutely right. Putting comments separately is the best thing to do. I just found the edit button on rhombus-tech.net ;), this should definitely make things easier ...

 yay, magic.   also stops duplication and AOL-style me-too postings.  if anyone remembers the AOL bbs...

l.

_______________________________________________
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk
http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
Send large attachments to arm-netbook@files.phcomp.co.uk