On Fri, Jan 5, 2018 at 4:05 AM, Luke Kenneth Casson Leighton lkcl@lkcl.net wrote:
On Fri, Jan 5, 2018 at 8:27 AM, Richard Wilbur richard.wilbur@gmail.com wrote:
On Fri, Jan 5, 2018 at 1:00 AM, Luke Kenneth Casson Leighton lkcl@lkcl.net wrote:
rectangular all-layers keepout, showing 1 and 3 here... damn layers 2 and 5 have a weird shape (not enough clearance auto-generated) let me make it an oval all-layers keepout instead...
Those do look very nice, indeed!
did the trick. pain doing them by hand, had to do the flood-fill, then adjust the keepout, then write down by hand the distances that the keepout fitted cleanly to the edges, _then_ throw that file away, _then_ go back and put the rectangle left-right... bletch :)
anyway i moved the PWM via up a bit, left the 3V3 VIAs where they were - sorted.
The results are great! Thanks for all the hard work to make it happen.
So I'm happy with the layout of the HDMI!
I checked for vias in component pads (manufacturability issue) and since the gerber viewer I'm using complains about all the tools in the drill file when I load it, I can't see the via holes. So there may be several false alarms in this list. Could even be mostly false alarms. But I would definitely check out C3 on layer 1 as there seems to be a via in the middle of one of the pads. (Marked with red arrow in attached picture.)
