<div dir="ltr"><div>Hello list, hello Normand,<br><br>2017-03-22 4:07 GMT+01:00 Normand Chamberland <<a href="mailto:gemnoc@gmail.com">gemnoc@gmail.com</a>>:<br><br>> On the manufacturing side, I wonder if it may be a good idea to check the<br>> real thickness of the 3mm plywood boards. Due to manufacturing tolerances,<br>> materials provided in sheets are often thinner than their nominal thickness<br>> be it for plywood, plastics etc.<br>Indeed, no ply board thickness ever is exactly 3mm. Either over or under 3mm, plus climate variations. The good news is that the plywood is fairly dimensionally stable in width and length.<br><br>> As for the screws, difficult to evaluate from a couple of pictures<br>Have you found the extra pictures? I've only seen the tiny extra picture at crowdsupply yet ...<br><br>> seem to be M3 socket head, black oxide, with hex nuts at the bottom<br>> (possibly 2 per screw) with some kind of either plastic or vinyl cap. Nickel<br>> plated screws would be better IMHO (considering the hex nuts are either<br>> nickel or zinc) and not prone to rust like black oxyde screws, but they<br>> might be difficult to source and more expensive.<br></div>ISO 7380 bolts with either plastic cap nut or hex nut with plastic cap would be nicest I guess. I plan to drop by my excellent supplier early next week to see what they recommend.<br><div><div><br>Kind regards,<br><br>Mark</div></div></div>